The guard shell mold of the electric vehicle charging pile, the upper mold and the lower mold, the upper end surface of the lower mold is invariably configured with a first invariable column and a second invariable column, and the first and second invariable columns are The upper end surface does not have a support plate, the lower end surface of the support plate does not have two sets of first hydraulic cylinders, the telescopic end of the first hydraulic cylinder does not have a moving plate, and the lower end surface of the moving plate does not have a first punch. , There are two sets of second hydraulic cylinders inside the first punching head, the second punching head is fixed at the telescopic end of the second hydraulic cylinder, and the first invariant column and the second invariant column are unchanged. There are unchanged boards. It is convenient to perform rapid stamping and forming of the charging pile guard shell, ensuring part-time obedience, and step-by-step stamping to further effectively ensure the result of stamping.
Electric vehicle charging pile charging cable storage, the bottom of the column is equipped with a supporting column, the bottom of the supporting column is equipped with a base, one side of the column is equipped with a constant seat, and the outside of the constant seat is equipped with a turntable, and the end of the turntable There are main teeth, and the main teeth are located inside the column, and the bottom end of the column and the outer side of the supporting column is provided with a shield. The main gear, auxiliary gear and coiling roller, and after application, the rolling turntable mobilizes the main gear to roll, and according to the meshing relationship between the main gear and the auxiliary gear, prompts the auxiliary gear and the coiling roller at the bottom to roll, and then the charging line During the coiling process, at the same time, the spirally twisted bumps on the outside of the coiling roller can make the charging wire spiral around when coiling, reducing the space in the shield and making the charging wire more symmetrical.
For the high-performance electric vehicle charging pile cable, a guard frame is arranged on the outside of the core wire, and the top of the inner cavity of the guard frame is unchanged and continuously has a rubber plate. Joint application of guard frame, rubber sheet, first patch, guard layer, polytetrafluoroethylene layer, fluorosilicone ethylene layer, polyvinyl chloride layer, rock wool layer, nano coating and chlorosulfonated polyethylene rubber layer, handle To solve the short application life of the existing high-performance electric vehicle charging pile cable, the high-performance electric vehicle charging pile cable has the advantage of long application life. The PTFE layer can improve the corrosion resistance, and the fluorosilicone ethylene layer can improve the corrosion resistance. It may increase its aging resistance, the polyvinyl chloride layer may increase the heat resistance, the rock wool layer may increase the fire resistance, the nano coating may increase the toughness, and the chlorosulfonated polyethylene rubber layer may increase the acid and alkali resistance. Good for people’s applications.
Post time: Mar-10-2021